2020 · Rubicon

Jeep Wrangler

Rubicon trim — 4 configurations

3,500lbs max tow

Best-case across all configurations

← All trims for 2020
2020 Jeep Wrangler Rubicon
Photo: Kevauto · CC BY-SA 4.0

Quick answer: how much can the 2020 Jeep Wrangler Rubicon tow?

The 2020 Jeep Wrangler Rubicon can tow up to 3,500 lbs when properly equipped (3.6L V6 gasoline, 4WD, 4.10 axle). Maximum payload is 1,351 lbs (3.6L V6 gasoline, 4WD, 4.10 axle). Your exact limits depend on engine, axle ratio, cab, bed and options: check the door-jamb sticker for your truck's payload and GVWR.

Source: 2020 Jeep Wrangler Specifications (FCA US media site PDF). Data last updated November 19, 2026.

2020 Jeep Wrangler Rubicon maximum towing capacity by engine
EngineMax towingRange
3.6L V6 gasoline3,500 lbs—
3.0L V6 diesel3,500 lbs—
2.0L I4 gasoline3,500 lbs—

TONGUE WEIGHT ESTIMATOR

ESTIMATE REAL-WORLD TONGUE WEIGHT BEFORE YOU TOW

Maximum loaded weight of your trailer

ADD REAL-WORLD EXTRAS

Propane tanks (20 lb)
0
× 40 lbs
Lead acid batteries
0
× 60 lbs
Fresh water (gal)
0
× 8.3 lbs

Enter your trailer GVWR to calculate estimated tongue weight.

Towing Calculator

Driver Weight (lbs)
Passengers
Avg Passenger Weight (lbs)
Bed Cargo Weight (lbs)
Hitch + WDH Equipment (lbs)

Ball hitch: 30–50 lbs · WDH: 100–200 lbs

Trailer Tongue Weight (lbs)
Max Rated
3,500
lbs · OEM rating
−
Load Penalty
0
lbs · above baseline
=
Available to Tow
3,500
lbs · your setup
Available (100%)
Payload Capacity200 / 1,351 lbs used
Remaining: 1,151 lbsHitch gear: 50 lbs included

Uses SAE J2807 standard (150 lb driver baseline). Always verify ratings with your owner's manual and dealer before towing.

Rubicon Configurations

Engine
Cab
Bed
Drive
Max Tow
Payload
3.6L V6 gasoline
285 hp · 260 lb-ft
D478 6-speed manual
—
—
4WD
MAX3,500lbs
1,351lbs
3.6L V6 gasoline
285 hp · 260 lb-ft
850RE 8-speed automatic
—
—
4WD
MAX3,500lbs
1,322lbs
3.0L V6 diesel
260 hp · 442 lb-ft
8HP75 8-speed automatic
—
—
4WD
MAX3,500lbs
1,233lbs
2.0L I4 gasoline
270 hp · 295 lb-ft
850RE 8-speed automatic
—
—
4WD
MAX3,500lbs
1,322lbs

MAX badge = highest tow rating for this trim. Load bar scales to 14,000 lbs. Red = >10,000 lbs (HD threshold).

Frequently Asked Questions

The 2020 Jeep Wrangler can tow up to 3,500 lbs, depending on the engine, cab style, bed length, and drivetrain. The maximum rated towing capacity of 3,500 lbs is achieved with the optimal configuration when properly equipped.

The 3.6L V6 gasoline delivers the highest towing capacity on the 2020 Jeep Wrangler, rated at up to 3,500 lbs. It produces 285 hp and 260 lb-ft of torque.

No — the 2020 Jeep Wrangler can reach its maximum towing capacity of 3,500 lbs without a factory tow package. However, adding a tow package may include convenience features like an integrated trailer brake controller or upgraded cooling.

The 2020 Jeep Wrangler configurations in our database are all 4WD. If both drivetrain options are available, 2WD typically tows slightly more due to lower curb weight.