2018 · JK 2-door

Jeep Wrangler

JK 2-door trim — 2 configurations

2,000lbs max tow

Best-case across all configurations

← All trims for 2018
2018 Jeep Wrangler JK 2-door
Photo: Kevauto · CC BY-SA 4.0

Quick answer: how much can the 2018 Jeep Wrangler JK 2-door tow?

The 2018 Jeep Wrangler JK 2-door can tow up to 2,000 lbs when properly equipped (3.6L V6 gasoline, 4WD, 3.21 axle, with the Trailer Tow Group). Maximum payload is 1,000 lbs (3.6L V6 gasoline, 4WD, 3.21 axle). Your exact limits depend on engine, axle ratio, cab, bed and options: check the door-jamb sticker for your truck's payload and GVWR.

Source: 2018 Jeep Wrangler JK brochure (FCA US, dealer CDN copy). Data last updated November 19, 2026.

TONGUE WEIGHT ESTIMATOR

ESTIMATE REAL-WORLD TONGUE WEIGHT BEFORE YOU TOW

Maximum loaded weight of your trailer

ADD REAL-WORLD EXTRAS

Propane tanks (20 lb)
0
× 40 lbs
Lead acid batteries
0
× 60 lbs
Fresh water (gal)
0
× 8.3 lbs

Enter your trailer GVWR to calculate estimated tongue weight.

Towing Calculator

Driver Weight (lbs)
Passengers
Avg Passenger Weight (lbs)
Bed Cargo Weight (lbs)
Hitch + WDH Equipment (lbs)

Ball hitch: 30–50 lbs · WDH: 100–200 lbs

Trailer Tongue Weight (lbs)
Max Rated
2,000
lbs · OEM rating
−
Load Penalty
0
lbs · above baseline
=
Available to Tow
2,000
lbs · your setup
Available (100%)
⚡

Tow package required: Trailer Tow Group

Payload Capacity200 / 1,000 lbs used
Remaining: 800 lbsHitch gear: 50 lbs included

Uses SAE J2807 standard (150 lb driver baseline). Always verify ratings with your owner's manual and dealer before towing.

JK 2-door Configurations

Engine
Cab
Bed
Drive
Max Tow
Payload
3.6L V6 gasoline
— hp · — lb-ft
—
—
4WD
MAX2,000lbs
pkg req.
1,000lbs
3.6L V6 gasoline
— hp · — lb-ft
—
—
4WD
MAX2,000lbs
pkg req.
1,000lbs

MAX badge = highest tow rating for this trim. Load bar scales to 14,000 lbs. Red = >10,000 lbs (HD threshold).

Frequently Asked Questions

The 2018 Jeep Wrangler can tow up to 2,000 lbs, depending on the engine, cab style, bed length, and drivetrain. The maximum rated towing capacity of 2,000 lbs is achieved with the optimal configuration when properly equipped.

The 3.6L V6 gasoline delivers the highest towing capacity on the 2018 Jeep Wrangler, rated at up to 2,000 lbs. It produces — hp and — lb-ft of torque.

Yes — reaching the maximum towing capacity of 2,000 lbs on the 2018 Jeep Wrangler requires the Trailer Tow Group tow package. Without it, towing ratings on some configurations are significantly lower. The package typically adds a trailer hitch receiver, upgraded transmission cooler, integrated trailer brake controller, and a higher-output alternator.

The 2018 Jeep Wrangler configurations in our database are all 4WD. If both drivetrain options are available, 2WD typically tows slightly more due to lower curb weight.